Technical Specifications - Mark MF 900 PRO Manual De Uso

EN
5. When LCD displays "READY TO FAZER", press "FUNCTION" button five times, then the
LCD shows" FAN SPEED 100%". In this mode , user can adjust the speed of fan by pressing
"UP/DOWN"buttons (the range is from 1% to 100%).
6. When LCD displays "R EADY TO FAZER", press "FUNCTION" button six times , then the
LCD shows "DMX 512". In this mode, user can adjust the DMX address by pressing
"UP/DOWN"buttons.There are two DMX channels for this Fazer machine. Channel one is for the
fan speed, and channel two for Haze output.
7. When LCD displays "READY TO FAZER", press "FUNCTION" button seven times, then the
LCD shows " F LUID SENSOR ". In this mode, user can set the status of " low-fluid protection " by
pressing "UP/DOWN"buttons.
8. When LCD displays "READY TO FAZER", press "FUNCTION" button eight times, then the
LCD shows " D IRECT TIMER". In this mode , user can set the ON/OFF of " TIMER memory
function" by pressing "UP/DOWN"buttons.
9. When LCD displays "READY TO FAZER", keep pressing the "MANUAL" button can force
the machine to generate 100% full haze output. As soon as releasing MANUAL button, the unit
stops spraying fog immediately.
How to release the " Low-fluid protection "
When the machine is with low haze fluid or no fluid, the LCD will display " EMPTY FLUID" .
1. After refilling haze liquid, keep pressin g "MANUAL " button until the display does not
flickering.
2. Press " FUNTION" button and navigate to " FLUID SENSOR " . Set the status to "OFF" .

Technical Specifications

Voltage used
Fuse
Power
Pre -heating time
Smoke output
Tank capacity
N.W.
G.W
Machine 's Size
Package size
AC 100~120V,
AC 220V -240V 50/60HZ
8A/250V
900W
2.5min
3500cuft/min
3.5L
19.5kg
20.5kg
534×510×207mm
600×590×265mm
MF 900 PRO - 4 -
User Manual/Manual de Uso