Introduction; Module Structure; Technical Details; Operation Of The Leds - Bio Bronpi Wifi-2 Instrucciones De Instalación, Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Remote connection
The smartphone is connected to the 4HEATmodule via data network provided by the user's own telephone operator or via
different Wi-Fi network.
The smartphone triangulates with the cloud server to reach the 4HEATmodule.
The dial-in times vary depending on traffic data network and the traffic to the server, reaching a worst case scenario delay of 5
minutes.
The remote connection mode can be used if the user is registered to the cloud server.
module
1.

INTRODUCTION

The KIT WIFI 2 module that you have purchased allows you through the 4HEAT application to remotely monitor and manage the pellets
products from Bronpi Calefacción with a smartphone, as long as you have an internet connection.
The main functions of the application are:
-
Turning the stove on and off
-
Checking the condition of the stove in real time.
-
Adjustment of working power (only if your Smartphone is connected to the same wireless network as the 4HEAT module).
-
Adjustment of the temperature of the water (Hydro appliances) or air (air units).
-
Program the chronothermostat.
-
Current temperature detected by the stove.
-
Choose language.
2.

MODULE STRUCTURE

The KIT WIFI 2 module is composed of three main elements:
-
KIT WIFI 2 module: device that connects the electronic stove card with the local wireless router.
-
Data Server: Web infrastructure that allows data to archive and act as the main point of the remote communication.
-
Aplication 4HEAT: mobile application which allows the user to interact with the stove.
The module includes:
3.

TECHNICAL DETAILS

Communication Port
Power supply
Material of the parts
Working temperature
Fixing
4.

OPERATION OF THE LEDS

The following image shows the LEDs that make up the module:
The meaning of the LEDs is as follows:
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
3
delay 2 min
delay 1 min
2
Wifi Module
2 Screws
RS232
5 V
Made of ABS
Between -20 ºC and 60 ºC
Fixing 3,5 mm self-tapping
screws
4
delay 0 ms
delay 0 ms
1
Interconection Cable
Dimensions:
70 mm
A
B
C
11
Charger
D
64 mm
E
REMOTE CONTROL WIFI2 MODULE

Publicidad

Tabla de contenido
loading

Tabla de contenido