How The App Works; Homepage - Bio Bronpi Wifi-2 Instrucciones De Instalación, Uso Y Mantenimiento

6.- You must then leave the Wi-Fi�4HEAT network and select the wireless
network of your house so that the module can be connected to it. Enter a
password that you own and press "OK".
In case the connection is made
satisfactorily, the following screen will be
displayed and in the module the LEDs A,
B and C will remain fixed:
In order to finish the configuration process
press "OK" and then close and open the
application.
From now on, you can manage the
operation of your stove or boiler remotely
from your Smartphone through a wifi
network.
In case of not getting a correct
connection, you must press the
configuration button E for 8 seconds and
restart the APP and repeat the previous
steps. If the error persists, press the reset
button (D) on the module.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
7.- Generate the PIN you want to access
the application 4HEAT, as well as name
the module with the name you want, for
instance: HOUSE, SALON, KITCHEN,
HOUSE OF THE MOUNTAIN, etc.
6.

HOW THE APP WORKS

6.1.

HOMEPAGE

On the main APP page, a list of configured devices, name, main temperature and its state of each unit is
displayed:
Meaning of the LEDs that appear next to each stove:
• Red: stove Off
• Green: stove On
• Yellow: stove blocked due to an error
• Grey: stove not connected
The setting button allows you to access the menu of the 4HEAT module connected to the stove.
13 REMOTE CONTROL WIFI2 MODULE