Specifications; Basic Information; Intended Use; Not Permitted - Prolux 310 405 Manual De Instrucciones Original

6 English

Specifications

Battery LED worklight
Lamps:
Version [colour]:
Voltage [V]:
Luminosity [lm]:
Light utilisation [lm/W]:
Beam angle [°]:
IP protection class:
Operating temperature [°C]:
Material:
Weight [g]:
Dimensions W x H x D [mm]:
Power supply:
Akkumulatoren:
Kapazität [mAh]:
Betriebsdauer Akku [h]:
Ladezeit [h]:
Lebensdauer [h]:

Basic information

It is essential that you read the original operating instructions completely and observe all notes and
information carefully before using the unit for the first time.
The operating instructions must be kept available to the user until the use of the product is terminated.
All information refers to products in good-as-new condition. If you remove or change safeguards or make
structural changes, any liability of the manufacturer is excluded.
These operating instructions correspond to the state of delivery of the product. ProLux Systemtechnik
GmbH & Co KG does not accept any liability for incorrect information and product damage due to improper
use.

Intended use

The battery-powered LED worklight is designed for illuminating indoor and outdoor workplaces within a
temperature range of -20°C to 60°C.
Only use the battery-powered LED worklight for the purposes described in this operating manual. Any other
use is not regarded as proper use.
Failure to do so may damage or destroy the product and could result in harm to health from electric shock,
fire or short circuit.

Not permitted

Only batteries with the specifications indicated and the chargers
included in the contents of the package may be used to charge and
operate the battery LED worklight.
- Never look directly into the LED of the worklight. There is a risk of glare and permanent damage to the eyes.
- Do not cover the unit during operation. This creates a fire hazard.
- Do not expose the battery LED worklight to direct sunlight and extreme heat (> 60°C).
- The battery-powered LED worklight must not be used or charged in the vicinity of explosive substances such
as petrol or gas.
- Do not charge the battery for more than 24 hours at a time.
- Do not dismantle the worklight. Repairs may only be carried out by the manufacturer

Organisational measures and safety

- Defective battery LED worklights, accumulators, mains chargers and car adapters must not be used.
- Never operate the device near flammable materials.
Original operating instruction – Akku-LED-Arbeitsscheinwerfer / Battery LED worklight
10 W-COB-LED
White/Orange (flashing)
12/24 + 230
800
80
120
IP65
-20 60
Aluminium/ABS plastic
1120
148 x 255 x 171
4 x Li-Ion 18650, 3,7 V
4400, 7,4 V
3,5
6 - 7
ca. 50000