K-Rain BL-24 Instrucciones De Uso página 3

b. Using the power supply provided,
insert the wires as shown and tighten
terminal screws by turning clockwise.
IMPORTANT:
Use only the power supply provided
(110/120 VAC input, 24VAC Outlet)
Do not strip the power supply wires
more than 1/4". If unprotected
power supply wires come in contact
outside the terminal strip, this will
result in damage to the controller.
3. Plug In the Power Supply:
With the wires securely installed in the
terminal strip, plug the power supply
into a 110V outlet. The red status light
will illuminate, indicating succesful
installation of the power supply.
4. Associate the BL-24 with your
Smartphone: With the controller
connected to power, associate the
BL-24 with your smartphone.
a. Ensure Bluetooth
going into Settings on your smartphone.
b. Launch the K-Rain BL application.
c. Choose the product you are installing:
is enabled by
02