Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INTRODUCTION.
We are grateful for the trust given to our Brand and we hope that the product you have just bought will
be very useful for you. This product has many characteristics that will make your job faster and easier.
Concepts such as Safety, comfort and reliability have been identified as priorities in product design.
GENERAL SAFETY GUIDELINES.
WARNING: Read and understand this manual before using this product. Failure to do so can result
in serious injury.
WORKING AREA.
•
Keep working area clean and well lit. Cluttered areas and benches invites accidents.
•
Do not use Riveting Tool into explosive atmospheres or in the presence of flammable liquids,
gases or dust.
•
Keep observers, childs and visitors away from working área. Distractions may cause a loss of
control.
PERSONAL SAFETY.
•
Warnings and instructions of this manual are not meant to cover all possible conditions and
situations that may occur. Stay alert, look what you are doing and use common sense when using
the pneumatic riveting tool.
•
Dress properly. Use adequate protection such as gloves, glasses, etc.
•
Do not aim the tool in directions where damage might result to persons, animals or to yourself.
TECHNICAL SPECIFICATIONS.
Blind Rivet setting capacity.
Tracting power.
Piston stroke.
Overall length.
Air inlet.
Air hose (inside diameter).
Maximum air pressure.
Net weigth.
Sound pressure level. (LpA).
Sound power level. (LwA).
Vibration. (Load).
WARNING!:
1. Do not exceed the maximum operating pressure (6,3bar).
2. Use hearing protectors when sound power level is higher than 80 dB(A).
SAVE THIS MANUAL.
Ø 2,4 – 3,2 – 4,0 y 4,8mm.
273mm.
¼" (6,35mm.)
3/8" (10mm.)
90.4 dB (A). Uncertainty K= 3 dB (A).
101.4 dB (A). Uncertainty K= 3 dB (A).
5.06 m/s². Uncertainty K= 1.5 m/s².
8
720Kg.
14mm.
6,3bar.
1,5Kg.
Publicidad
