Auto Changeover; Special Features - Honeywell TH7000 Serie Manual De Funcionamiento

Operating Manual

Auto Changeover

When the system is set to Auto, the thermostat automatically selects heating or cooling
depending on the indoor temperature and the temperature settings. The thermostat main-
tains a 3 degree difference between the heat and cool settings. See example below.
Tue
69
º
System Auto Fan Auto
Heat
System
Hold
CAUTION: To avoid possible compressor damage, do not use Auto
Changeover if the outside temperature drops below 50 °F (10 °C).
69-2667ES—01
Temporary
Set To
74
1 : 09
PM
Heat
Cool
Cancel
The triangle indicates the cool temperature is
increasing to maintain 3 degrees between heat
and cool settings.
M27534
14