More Functions - Samsung NX60 875 S Serie Manual Del Usuario

Gas oven
To enable the Sabbath option
1. Start a Bake Mode. (single mode only.)
2. Tap , and select the Sabbath option.
3. Turn the dial knob to select On.
4. Push the dial knob to save the changes.
NOTE
• You can change the oven temperature once baking starts, but the display will not
change or beep. After changing the temperature, it takes 15 seconds before the
oven recognizes the change.
• You can turn off the oven at any time by tapping OFF. However, this doesn't
deactivate the Sabbath option.
• To deactivate the Sabbath option, hold down
• You can set the cooking time before activating the Sabbath option.
• After a power failure, the oven will not resume operation automatically. "Sabbath"
will appear in the control panel, but the oven will not turn back on. Food can be
safely removed from the oven, but you should not turn off the Sabbath option
and turn the oven back on until after the Sabbath/Holidays.
• After the Sabbath observance, turn off the Sabbath option by tapping and
holding for at least 3 seconds.
38 English
NX60T8751SS_AA_DG68-01219A-00_EN.indd 38
• Do not attempt to activate any other functions except for Bake when the Sabbath
3
• Do not open the oven door or change the oven temperature for about
2

More Functions

Tap the
additional functions or change various settings for your oven. Please refer to the
following table for detailed descriptions.
for 3 seconds.
CAUTION
option is on. Only the following pads will function properly: Number Pad, Bake,
Oven Start/Set, and Oven Off.
30 minutes after you have started the Sabbath option. Let the oven reach the set
temperature. The oven fan operates only when the oven temperature increases.
button on the control panel, and then turn the dial knob to use
Setting
Timer Timing function.
Self-Clean Burn off leftover grease and residue completely or
reduce them.
NOTE
See page 49.
Favorite Save the cooking mode and value frequently used.
My Mode List Add or remove cooking modes.
Lock Lock the control panel and the door.
2
1
Description
3/26/2020 8:39:38 PM