Parts Description - ORDISI AP-92 Manual De Uso Y Mantenimiento

TABLE OF CONTENTS
1.- INTRODUCTION
2.- MANUFACTURER'S LIABILITIES

3.- PARTS DESCRIPTION

4.- INSTALLATION AND COMMISSIONING
5.- CLEANING AND STERILIZING
6.- ENTERTAIMENT AND MAINTENANCE
7.- TECHNICAL CHARACTERISTICS
8.- SPECIAL ACCESSORIES
9.- DIAGRAMS AND DRAWINGS
10.- POSSIBLES AVERAGES AND THEIR CORRECTION
11.- TECHNICAL SPECIFICATION, EMC INFORMATION
1.- INTRODUCTION
Your straightforward assurance on our products by purchasing an ORDISI, S.A. portable aspirator of the AP-92
series, is very much appreciated.
Before you start the aspirator for the first time, please read these instructions carefully. If you have any questions,
please contact your nearest ORDISI distributor or contact us to our head office directly:
2.- MANUFACTURER'S LIABILITIES
O R D I S I , S . A . is responsible to whatever is related to the equipment safety, reliability and operation but only:
O R D I S I , S . A .

If equipment is operated according to this manual's instructions.

If any accessories and consumables regularly replaced, are original and/or confirmed by ORDISI, S.A.

If readjustment, extensions and/or repairs, are performed by ORDISI, S.A.'s duly authorized personnel.
3.- PARTS DESCRIPTION
1.- ON/OFF light-switch
2.- Vacuum gauge
3.- Patient's connector
4.- Vacuum connector
5.- Top
6.- Safety valve
7.- Collection bottle
8.- Vacuum regulator
9.- Power supply cable
10.- Fuses and fuseholder
11.- Characteristics plate
12.- Bacteria filter
13.- Body
ORDISI, S.A.
Tecnologia, 2
08780 Palleja (Barcelona) - España
Tel.: +34 93 334 01 12
Fax.: +34 93 440 25 64
e-mail: comercial@ordisi.com
ENGLISH
Página 8 de 13