PUFF AVATAR Q Manual De Instrucciones página 23

with a charged one.
RECHARGING MODE
Micro USB charger cable
Insert the PUFF micro USB cable plug into the microusb input port of the battery, then connect it with
a PUFF USB port. The leds under the button will flash, then a little red led will light beside the microusb
input of the battery, thus indicating that recharging process has started. When the charging is complete
the red led will turn off.
Wall charger
Follow the above charging instructions by connecting the USB plug of the cable into the USB output
port of PUFF wall charger.
The first charging time of a new battery is 8 hours.
Succeeding recharges take about 2/3 hours.
23