Logic3 i-Station Tower Manual Del Usuario página 12

Set up of Aux
The i-Station Tower also offers the ability to allow other portable audio devices such as iPod shuffle, MP3,
MiniDisc and other audio devices with a 3.5mm headphone socket to be connected via the Auxilary.
1. Plug in a line in cable (not included) into the rear of the i-Station Tower (Aux Socket).
2. Connect the other end of the line in cable to your devices headphone socket.
3. Set your device volume to Maximum.
4. Press the 'Source' button on the i-Station Tower / the 'Standby' button on the Remote Control to turn on the
unit.
5. Press the 'Source' button on the i-Station Tower / Remote Control to toggle through the source until you
have selected AUX.
Note: Remember to remove the line in cable when not using the i-Station Tower via line-in, as the line
in cable will override any sound coming from the docking station.
Trouble Shooting
Problem
No Sound/Picture
Remote Control is not
working
FM Radio not clear /
Radio station not found
i-Station does not
respond to any controls
What Should I do?
Check play status on the iPhone/iPod
Please try updating the software for your iPhone/iPod using the latest version of
iTunes.
Check that you have connected the i-Station Tower correctly (see Set Up of
Video Connection)
Check your iPod is set to TV out (refer to your iPod manual for settings)
Check your format settings (PAL, NTSC refer to your iPhone/iPod manual for
settings)
Replace battery
Check the battery is inserted correctly (Polarity)
Ensure the remote control operating range is within 6metres from the i-Station
Tower
Re-position the FM antenna cable until the radio station sounds clearer
Press the Reset button on the rear of the i-Station Tower