Logic3 i-Station Tower Manual Del Usuario página 9

3. Using the 'Volume' buttons on the i-Station Tower / Remote Control, set the Minutes.
4. Press the 'Alarm' button on the i-Station Combo / Remote Control to skip to the next stage.
5. Using the 'Volume' buttons on the i-Station Tower / Remote Control select which source you wish to set to.
6. Press the 'Alarm' button to confirm all settings and the display will return to the current time display and AL
will be indicated on the bottom left of the display to show the 'Alarm' is active.
AL
To swtich the Alarm ON/OFF: –
A. Via the i-Station Tower
To Switch ON the Alarm
1. Press and hold the Alarm Button on the i-Station Tower / Remote Control until the hour and minutes units
flash.
2. Leave until the display returns to the orignal time display, Alarm icon (AL) will be indicated on the bottom left
of the display to show the 'Alarm' is active.
AL
OR
OR