Publicidad
6.
Insert register assembly within boot and secure register assem-
bly to wall with (2) No. 10 x 1" (25mm) screws provided.
Use pull chain to adjust damper in order to regulate heat dis-
charge.
7.
If installed, remove outer casing from furnace.
8.
Attach privacy shield to the front of the inner casing, approxi-
mately 12 7/8" below the top of the inner casing, with (4) #10
x 1/2" (13mm) screws provided.
9.
Installation of rear register is completed.
23892-0-0807
Figure 4
Figure 9
HWGWTR-1 Assembly View and Parts List
Index No.
Part No.
1
GWT-109
2
23890
3
GWT-111
Description
Register Boot
Register with Damper
Privacy Shield
Page 3
Publicidad
