Thermostat Is Preset, Ready To Go - Honeywell RTH2300 Serie Manual De Instrucciones

This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is set the
time and day. Then check the settings below and change if needed:
1. Set time and day (required for proper operation) .........................See page 6
2. Select system setting: Preset to Off ................................To change, see page 7
3. Select fan setting: Preset to Auto ...................................To change, see page 8
4. Program schedules: Preset to energy-saving levels
while you're at work or asleep ....................................To change, see pages 9-12
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and
manually adjust the temperature (see pages 13-14).
69-2605ES_A.indd 3
3
RTH2300/RTH221
69-2605ES—02
5/25/2011 11:51:47 AM