Edesa SCFE-40 E Instrucciones Generales Para Instalación, Uso Y Mantenimiento página 13

The positioning and electrical and gas installation should always be carried out by an AUTHORISED
TECHNICIAN, observing the standards of each country.
It is advisable to install an extraction hood for the optimum operation of the appliance.
Place the appliance in a well-ventilated place.
Level and adjust the height of the appliance. (Fig. 1) and (Fig. 1A)
Plug the machine and switch it on.
Do not touch the heating zone, it is a hot zone.
Daily cleaning
In order for the appliance to work as new, it is advisable to follow the following instructions:
a) Do not use gritty and abrasive detergents.
b) Do not use a water hose to clean the appliance.
Functional components
1. Resistors
IMPORTANT NOTE:
The replacement of any functional component that can affect the safety of the appliance must be carried
out by an AUTHORISED TECHNICIAN.
Before making any changes, ensure that the power switch is off.
1.-INSTALLATION
Positioning and levelling
2.-USE
3.-MAITENANCE
Maintenance
12