Dell PowerEdge 2420 Guia De Instalacion página 12

2 Remove the right door.
While supporting the door, pull the pin for the top hinge out
a
of the door's hinge-pin housing (see Figure 1-3).
You will hear a click as you pull the pin out of the door's hinge-pin
housing. The hinge pins are designed to prevent them from being
pulled out of the hinge body.
Repeat step a for the bottom hinge.
b
Pull the door away from the rack.
c
Figure 1-3. Removing the Back Doors
1
3
WARNING:
the removed door flat with its outer surface facing upward.
Lay the door in a safe location with the door's outer surface facing
d
upward.
Laying the door flat with the outer surface facing upward will help
prevent damage to the door's cosmetic coating.
Repeat steps a through d for the left door.
e
10
Installation Guide
hinge pin
hinge-pin housing
Due to the size and weight of the door, it is recommended that you lay
2 hinge body
1
2
3