Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION KIT INCLUDES:
1 Header Track
1 Universal Hardware Pack
(2 Packs for By-Pass Doors)
Universal Hardware Pack
Optional Items
•
Bottom Channel Guide
•
Soft Close
•
Fascias
1. Preparing By-Pass and Pocket
Door Openings:
Determine the minimum height required from
floor to Rough Header by calculating the door
height plus 2-7/8" (+/- 1/4") when using floor
guide. If using wall mounted bottom guide allow
3-1/4" (+/- 1/4").
Floor Clearances using above dimensions:
Floor Guide allows 3/8"
Wall Mounted Guide allows 3/4"
Side Wall Mount
Locate top edge of track, door height plus 4"
(+/- 1/4") from floor when using floor guide.
If using wall mounted guide allow 4-3/8"
(+/- 1/4").
Fascias require 1" minimum spacing above top
of track for clearance during installation.
INSTALLATION INSTRUCTIONS
S
liding
Slal-250-BP
Slal-250-Pd
Slal-250-Sw
d
H
oor
ardware
B
-P
y
aSS
P
ocket
S
w
ide
SLAL-250-BP
SLAL-250-PD
SLAL-250-SW
d
oorS
d
oorS
M
all
ount
12.20
Publicidad
Manuales relacionados para NGP SLAL-250-BP
Resumen de contenidos para NGP SLAL-250-BP
- Página 1 INSTALLATION INSTRUCTIONS liding ardware Slal-250-BP oorS Slal-250-Pd ocket oorS Slal-250-Sw ount INSTALLATION KIT INCLUDES: 1 Header Track 1 Universal Hardware Pack (2 Packs for By-Pass Doors) Universal Hardware Pack SLAL-250-BP Optional Items • Bottom Channel Guide • Soft Close •...
- Página 2 2. Cut Track to Fit Application 3. Installing Hangers INTO TRACK Track From the open end of track, slide Hangers into track as shown. Installing Hangers with Soft Close into track, refer to Soft Close Instructions. Hanger 2-1/8" 4. Install Track a) Make sure track is level.
- Página 3 Hook fascia onto top groove and pull bottom forward to snap bottom into place, working from one end towards the other. Use with Side Wall Mount 2-1/2" SLAL-250-SW 2-3/4" 3" SL-SQ20 4" 4" 3-1/4" Use with By-Pass SLAL-250-BP Pocket SLAL-250-PD SL-RD SL-SQ18...
- Página 5 INSTRUCCIONES DE INSTALACION erraje uerta orrediza SLaL-250-BP uertaS orredizaS oLganteS SLaL-250-Pd uerta orrediza mPotrada SLaL-250-SW uerta orrediza de ared JUEGO DE INSTALACION INCLUYE: 1 Riel de Cabecera 1 Juego de Herrería Universal (2 Juegos de herrajes para las puertas colgantes corredizas)
- Página 6 2. Corte el Riel a la Medida 3. Instalación de las Correderas DENTRO DEL RIEL Riel Desde el lado abierto del riel deslice las Correderas hacia adentro del riel como se muestra. Para la instalación de Correderas con Cierre Suave dentro del riel, siga a las Instrucciones de Cierre Suave.
- Página 7 Use con 2-1/2" Puerta de Pared Deslizante SLAL-250-SW 2-3/4" 3" SL-SQ20 4" 4" 3-1/4" Use con Puertas Corredizas Colgantes SLAL-250-BP Puerta Corrediza Empotrada SL-RD SL-SQ18 SLAL-250-PD...