Publicidad
Idiomas disponibles
Idiomas disponibles
Track
Hanger
2-1/8"
FASTENER
2-3/4"
3-13/16"
Hanger
Post
Door
Door Plate
2. Cut Track to Fit Application
3. Installing Hangers INTO TRACK
From the open end of track, slide Hangers into track as
shown.
Installing Hangers with Soft Close into track,
refer to Soft Close Instructions.
4. Install Track
TRACK
EXTRUSION
DOOR HANGER
5. Installing Door Plates on Door Panel
Position both Door Plates on top of door panel at least
1-3/4" in from left and right edges of door panel.
Secure Door Plates to top of door panel using eight
(8) #8 x 1-1/2" screws, 4 for each door plate.
Hanger
Door
a) Make sure track is level.
b) Fasten using #8 x 1-1/2" pan head fasteners (not
included) into all track mounting holes.
Note: Side Wall Track furnished blank, allowing mounting holes to
be located as required by field conditions.
6. Installing Door(s)
Door Plate
a) Insert door onto Hanger by lift-
ing the door and sliding Door
Plate onto post as shown.
b) Using the wrench provided turn
the post to adjust the door ver-
tically so it has sufficient floor
clearance and is plumb. Do not
unscrew post from Hanger.
Publicidad
