KENMORE ELITE 580.77157710 Manual De Uso página 11

Cut the adhesive-backed heatproof foam to match
10
the size of the curtain panels. Remove the backing
from the heatproof foam and attach it to the curtain
panels.
NOTE: Heatproof foam improves the cooling
capability of the air conditioner.
Fold out the vent control lever located to the left of
11
the control panel, as shown.
Connect the wire harness from the front grille
12
assembly to the air conditioner.
Attach the front grille assembly to the cabinet by
13
inserting the grille tabs into the slots on the front
of the cabinet. Push the grille in until it snaps into
place.
NOTE: Carefully guide the vent control lever through
the grille as you push the grille in.
INSTALLATION INSTRUCTIONS
Heatproof Foam
Open the air inlet grille and secure the front grille
14
assembly with 1 type A screw through the bottom of
the front grille. (There are 2 type A screws packed
in a small bag. Use one and store one as a spare.)
The window installation of the room air conditioner
is now complete. See the Electrical Data section for
information on attaching the power cord to an electrical
outlet.
11