Quick-start guide
RA2 Select Main Repeater
Please read before installing
Contents supplied:
RA2 Select Main Repeater*
(RR-SEL-REP2)
5 V- 300 mA
Power Supply
(T-5DC-USB)
Input: 100–240 V~ 50/60 Hz 100 mA
Output: 5 V- 550 mA
Ethernet Cable
* Connected to a Class 2, LPS, or SELV,
limited energy (<15 W) power source only.
Extend Your Warranty
Love Lutron products? Have ideas for
making them better? Tell us what you
think and we'll extend your warranty
by 1 year.
www.lutron.com/RegisterRA2Select
Customer Assistance
U.S.A. and Canada: 1.844.LUTRON1
Fax: +1.610.282.6311
Mexico: 1.888.235.2910
Other countries: +1.610.282.3800
www.lutron.com/support
1
Install the RA2 Select Main Repeater
A. Connect the Main Repeater
to your Wi-Fi router using the
Ethernet cable.
0301866
Rev A
Main
Ethernet
cable
2
Download the Lutron app and walk through setup
Note: The RA2 Select Main Repeater
cannot be used with the RadioRA 2
PC-based programming software.
Warranty
For warranty information, please visit www.lutron.com/warranty
)Lutron, Lutron, and
other countries. RadioRA 2 is a trademark of Lutron Electronics Co., Inc.
Apple is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service
mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play
logo are trademarks of Google Inc.
© 2017 Lutron Electronics Co., Inc.
B. Connect the power cord to the
Main
Router
Repeater
Search for "Lutron App"
are trademarks of Lutron Electronics Co., Inc. registered in the U.S. and
Lutron
Main Repeater and plug it into an
outlet.
Outlet
Power
cord
Router
Lutron
Accessory
Setup Code