Replacing The Squeegee Rubbers; Brushes Disassembly - BETCO GENIE APS B Manual Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. REPLACING THE SQUEEGEE RUBBERS

Check the condition of the squeegee rubbers. Replace as necessary. To replace the rubbers:
1. Lift the squeegee
2. Remove the two knobs
3. Detach the squeegee from the support
4. Remove the tube from the squeegee opening to permit the squeegee be removed
5. Unscrew the squeegee knobs that clamp the blades and pull them out
6. Remove the blades
7. Replace the rubbers
8. Reinstall everything by performing these procedures in reverse

4. BRUSHES DISASSEMBLY

1.
Lift the squeegee
2.
Lift the machine by pressing down on the handlebar
3.
When the base if lifted jog the brush control. The brush releases automatically
ATTENTION: Make sure there are no objects or persons in he vicinity of the
brush when doing this operation
DAILY MAINTENANCE
16

Publicidad

Tabla de contenido
loading

Productos relacionados para BETCO GENIE APS B

Tabla de contenido