Mounting Flat Panel Screen With Peerless Plp Model Adapter Plate (Plp Adapter Plates Are Not Ul Listed) - peerless-AV SP850 Instalación Y Ensamblaje

FOR VESA 200 MOUNTING PATTERN:
Thread two M4 x 12 mm screws (BB), leaving .25" exposed thread, into top holes on back of screen. Hook screen
onto mounting plate, and attach using two bottom M4 x 12 mm screws as shown in fi gures 4.3 and 4.4. Tighten all
four screws.
FOR SCREENS WITH VESA MOUNTING PATTERN IN A POCKET:
Thread two retaining spacers (L) onto two M4 x 20 mm screws (CC), leaving .25" exposed thread as shown in
fi gure 4.5. Thread M4 x 20 mm screws with retaining spacers into top holes on back of screen. Hook screen onto
mounting plate, and attach using bottom two M4 x 20 mm screws and retaining spacers as shown in fi gures 4.3 and
4.4. Tighten all four screws.
MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY
FOR CLARITY)
For screen compatibility please refer to the plasma interface list on our website www.peerlessmounts.com or
call customer care for a screen specifi c adapter bracket (PLP models).
FOR INSTALLING TO PEERLESS PLP MODEL ADAPTER BRACKET (not UL listed)
Note: Refer to PLP model adapter bracket instruction sheet for attachment of adapter bracket to screen.
Thread two M10 x 15 mm screws (K), leaving .25" exposed thread, into top holes on back of screen. Hook screen
5
onto mounting plate, and attach using two bottom M10 x 15 mm screws as shown in fi gures 5.1 and 5.2. Tighten
screws using 6 mm allen wrench (not included).
GENERIC
ADAPTER
BRACKET
MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY
FOR CLARITY)
MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
fi g. 4.3
WALL MOUNT ASSEMBLY
FOR CLARITY)
GENERIC ADAPTER
BRACKET
K
fi g. 5.1
7 of 21
MOUNTING PLATE
K
ISSUED: 10-12-05 SHEET #: 202-9038-9 06-29-11
For screens with a hole
pattern in a pocket,
spacers (L) go between
mounting plate and
screen.
Note: Flat panel screen
may appear slightly dif-
fi g. 4.4
ferent than illustrated.
fi g. 4.5
fi g. 5.2