Legamaster LS2000 Manual Del Usuario página 6

NOTE:
Once paired, a device will auto-connect to the soundbar when in range and when the soundbar is not paired to another device.
The range of a Bluetooth-signal is limited. Please stay within 10 meters of the soundbar to guarantee a stable signal.
A device can be disconnected and prevented to auto-connect. Select LS2000 from the list of connected devices
and select 'forget device'.
paired devices / etc.)
5. CONNECTING THE LS3000 SUBWOOFER TO THE SOUNDBAR
The Legamaster LS2000 can be upgraded by connecting the Legamaster LS3000 subwoofer to the audio-system.
To connect the LS3000 Subwoofer to the soundbar, first plug in the power adapter in a suitable power-outlet, and connect the other end to
the subwoofer.
Press the 'connect' button on the back of the subwoofer. Please make sure no other soundbars than the soundbar that is intended to connect
to the subwoofer are located close-by and are switched on, as the subwoofer may connect to the wrong soundbar unit.
After pressing the 'connect' button, the subwoofer will connect to the Legamaster LS2000 Sounbar.
6. PRECAUTIONS AND SAFETY INSTRUCTIONS
If smoke or a peculiar smell comes from the product, remove the power plug from the socket immediately.
Failure to do so may result in fire or electric shock.
If liquid is spilled or objects are dropped inside the product, remove the power plug from the socket
immediately.
Failure to do so may result in fire or electric shock.
If the powercord is damaged or becomes hot, turn off the product. Make sure the plug has cooled down and
remove the plug from the socket.
USER MANUAL
4
LS2000 / LS3000 – USER MANUAL – ENGLISH
(sometimes called 'my devices /
(LS3000 sold seperately).