Resetting The Picture Settings To The Factory Defaults - Samsung 610 Serie Manual Del Usuario

Setting the movie Plus
The TV can be set to automatically sense and process film signals from all sources and
adjust the picture for optimum quality.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 21)
2. Press the ▲ or ▼ button to select "Movie Plus", then press the EntEr
3. Press the ▲ or ▼ button to select "Off", "Low", "Medium", "High" or "Demo", then
press the EntEr button. Press the ExIt button to exit.
This function is not available in "Wide Zoom" and "Zoom" modes.
➣
It is not supported in HDMI1080p/24Hz, 25Hz, 30Hz mode.
➣
Setting the blue only mode
This function is for AV device measurement experts. This function displays the blue signal
only by removing the red and green signals from the video signal so as to provide a Blue
Filter effect that is used to adjust the Color and Tint of video equipment such as DVD
players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to
the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow
Color Bar Patterns, without using an additional Blue Filter.
1. F ollow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 21).
2. Press the ▲ or ▼ button to select "Blue Only Mode", then press the EntEr
3. Press the ▲ or ▼ button to select "Off" or "On", then press the EntEr
Press the ExIt button to exit.
"Blue Only Mode" is available when the picture mode is set to "Movie" or
"Standard".

resetting the Picture Settings to the factory Defaults

1. Press the mEnu button to display the menu.
Press the EntEr button, to select "Picture".
2. Press the ▲ or ▼ button to select "Reset", then press the EntEr
Press the ▲ or ▼ button to select "OK" or "Cancel" then press the EntEr
Press the ExIt button to exit.
Each mode can be reset.
button.
button.
button.
button.
button.
English - 4
tV Picture options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
movie Plus : Low
Blue Only Mode : Off
move Enter
tV Picture options
Color tone : normal
Size : :
off
Digital nr : auto
low
Dnle : off
medium
hDmI black level : normal
high
movie Plus : low
Demo
blue only mode : off
move Enter
tV Picture options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
movie Plus : Low
Blue Only Mode : Off
move Enter
tV Picture options
Color tone : normal
Size : :
Digital nr : auto
Dnle : off
hDmI black level : normal
movie Plus : low
blue only mode : off off
on
move Enter
tV Picture
▲ More
Picture options
reset : oK oK
Cancel
move Enter
►
►
►
►
►
►
►
return
return
►
►
►
►
►
►
►
return
return
return