Resetting The Picture Settings To The Factory Defaults; Changing The Picture Size; Setting The Digital Noise Reduction (Digital Nr); Dynamic Contrast - Samsung LN-R2355W Instrucciones Del Propietario

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Using Automatic Picture Settings " instructions number 1 to 4 on page 9.
2. Press the
3. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu.
Press the
2. Press the
3. Select the required option by pressing the
Press the ENTER
4. Press the EXIT button to exit.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Panorama: Adjusts 16:9 to 4:3 in a natural way as for normal broadcasting.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Select
Use the
After selecting

Setting the Digital Noise Reduction (Digital NR)

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help
reduce any static and ghosting that may appear on the screen.
1. Press the MENU button to display the menu.
Press the
2. Press the
3. Press the
Press the ENTER
4. Press the EXIT button to exit.
This function don't work in PC mode.

Dynamic Contrast

Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create
optimum contrast.
1. Press the MENU button to display the menu.
Press the
2. Press the
3. Press the
Press the ENTER
4. Press the EXIT button to exit.
This function don't work in PC mode.
or button to select "Reset", then press the ENTER
or button to select "Picture", then press the ENTER
or button to select "Size", then press the ENTER
button.
by pressing the or buttons.
or button to move the picture up and down.
, use the or button to magnify or reduce the picture size in the vertical direction.
or button to select "Picture", then press the ENTER
or button to select "Digital NR", then press the ENTER
or button to select "On" or "Off".
button.
or button to select "Picture", then press the ENTER
or button to select "Dynamic Contrast", then press the ENTER
or button to select "On" or "Off".
button.
English-10
button.
button.
button.
or button.
button.
button.
button.
button.