First Alert SmartBridge Guia De Inicio Rapido

ENGLISH
DVR QUICK START GUIDE
Product Contents
Power
MENU 1 2 3 4
IR
ESC 1 2 3 4
Rec
DVR
REMOTE CONTROL &
USB 2.0 MOUSE
WARNING
STICKERS
THESE PREMISES ARE UNDER
24 HOUR VIDEO SURVEILLANCE
PROTECTED BY
Remote Software
Installation Disc
Step 1: Connect the DVR to your Monitor or TV
(Monitor Option)
1
Connect a VGA cord (not included) from your monitor to the VGA Output port on the back of your DVR
1 (TV Option)
Connect the end of the BNC-RCA adapter (not included) "BNC SIDE ONLY" cable to the back of the
DVR labeled "Video Output"
2 Connect the BNC-RCA (RCA SIDE ONLY) cable to an open video (yellow RCA) input on your TV/Monitor
(note the input name or number)
3 Turn on your TV/Monitor and select the appropriate input (noted above)
3
1
1
2
VGA
Step 2: Connecting the Cameras / DVR
Connect the BNC & power from camera with BNC power cable using the side labeled
1
"Camera Side"
Using other side of BNC power cable labeled DVR side only, connect BNC to BNC
2
video input on DVR
3 Connect camera power cable to one of the multi power splitter ends
4 Plug camera power supply into wall outlet
Connect DVR power supply to DVR
5
Plug DVR power supply into wall outlet
6
2
1
POWER SUPPLY
DVR & CAMERAS
ETHERNET CABLE
Step 3: Connecting the Mouse and Ethernet Cable
1 Connect the USB mouse to the bottom USB slot on the back
Connect the Ethernet cable to the back of the DVR labeled either NET or RJ45
2
3 Connect the other end of the cable directly to your router, modem or high speed
internet connection input
Note: USB mouse and ethernet cable input locations may vary model to model.
BACK of DVR
5
3
(Attach for each camera)
6
(Power Splitter)
3
Back of DVR
2
1
REMOTE ACCESS REMOTE ACCESS
Easy Setup
1 Obtain unique system ID from DVR
• Right click and ID will be displayed
PC Connect Setup
2
4 • Insert SmartBridge Remote Software Installation Disc into your computer or laptop
4
• Install Software
• Open Program
• Enter Unique System ID into the Device ID prompt,
Password is set to a default 123
• Select "Login" to access your system
Smartphone and Tablet Setup
3
• Download SmartBridge Mobile App
• Open App and enter Unique System ID into the Device ID prompt
• Select "Login" to access your system
Go to firstalert.com to find complete instruction manual for your First Alert DVR.
© 2013 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc., Aurora, Illinois
60504. BRK Brands, Inc. is a subsidiary of Jarden Corporation (NYSE: JAH). First Alert® is a
registered trademark of the First Alert Trust. Due to continuing product development, the product
inside the packaging may look slightly different than the one on the package. To obtain warranty
service, contact the Consumer Affairs Division at 1-800-323-9005, Monday through Friday, 7:30
a.m. - 5 p.m., Central Standard Time.
www.firstalert.com
VGA Input or BNC-RCA Input TV/Monitor