nedis FNCL10XX20 Guia De Inicio Rapido página 5

•
Do not let water enter the product.
•
Do not use the product in wet or damp environments.
•
Do not cover the product.
•
Keep the product far away from loose products (e.g. curtains, plastic bags,
paper) that can cover the air inlet easily.
•
Do not use the product in rooms where flammable liquids or gases are used
or stored.
•
Do not place the product on moving vehicles or somewhere easy to be
tipped over.
•
Unplug the power cord when the product is not in use for a long time.
•
Do not unplug the product by pulling on the cable. Always grasp the plug
and pull.
•
When using an extension cord, use one which is as short as possible and fully
extended.
•
Do not use the product using an on/off timer or other equipment which can
automatically switch the device on.
• Do not locate the product immediately below a power outlet.
•
This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric shock.
Use
1. Connect the product to a power outlet.
1
2. Switch A
to "I".
4
The product spins at low speed.
1
3. Switch A
to "II".
4
The product spins at high speed.
1
4. Switch A
to "O".
4
The product switches off.
Specifications
Product
Article number
Dimensions (l x w x h)
Input voltage
Power input
Retro Desk Fan
FNCL10XX20
260 x 110 x 310 mm
AC 220 - 240 V ~ 50 Hz
Max 20 W
5