Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
o Remove the rubber plug from the back
drain outlet of the unit and set aside.
Remove bucket, and insert the drain tube
through the drain outlet on the backof
the
unit. Securely press the end of the tube onto
the internal
connector
on the inside of the
unit(See Fig. 9).
• Use the two supplied screws to screw adaptor
A to the back of the unit.
• Screw the female threaded
end of the garden
hose onto adaptor
A (see Fig. 10). Lead the
hose to a floor drain.
Make sure the hose is secure so there are no
leaks.
• Direct the hose toward the drain, making sure
that there are no kinks that will stop the
water flowing.
Place the end of the hose into the drain and
make sure the end of the hose is level or below
the drain outlet on the unit. Never let the hose
run upwards.
• Place the bucket back in the unit and make sure
that it is correctly
in place.
• Continuous draining
will begin once the the unit
begins operation.
Drain tube
Figure 8
Drain tube
Figure 9
Garden hose
threaded
end
Figure 10
12
Publicidad
Tabla de contenido
