Safety Precautions
The lightning fl ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of suffi cient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
NOTES:
The serial number plate is on the
●
battery mount of the camera.
CAUTION:
The mains plug shall remain readily
operable.
Remove the mains plug immediately
●
if the camcorder functions
abnormally.
WARNING:
The camcorder should not be exposed
to excessive heat such as direct
sunshine, fire or the like.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any ventilation
openings. Install in accordance
with the manufacturer's
instructions.
7. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus
(including amplifiers) that produce
heat.
8. Protect the power cord from being
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
2
the apparatus.
9. Only use attachments/accessories
specified by the manufacturer.
10. Unplug this apparatus during
lightning storms or when unused
for long periods of time.
11. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
if the power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
If a malfunction occurs, stop using
the camcorder immediately and
contact www.jvc.com or by phone at
1-800-252-5722
Changes or modifications not
approved by JVC could void the
user's authority to operate the
equipment. This equipment has
been tested and found to comply
with the limits for a Class B digital
device, pursuant to Part 15 of the
FCC Rules. These limits are designed
to provide reasonable protection
against harmful interference in
a residential installation. This
equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of
the following measures: Reorient
or relocate the receiving antenna.
Increase the separation between the