Controlling Combo Devices; Using Shift - Jasco 34932 Instruction Manual

Programming Your Remote

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/
VCR, etc.) will require you to set up two different
Mode buttons to control both parts of the Combo
device. For example, if you have a TV/DVD Combo,
you might need to set up one code under the
TV button to control the TV part AND a separate
code (under any other Mode button) to control the
DVD part.

Using SHIFT

The SETUP/SHIFT button allows access to more
than one function for certain buttons.
For MENU, press and release
SETUP/SHIFT then INFO/MENU.
For GUIDE, press and release
SETUP/SHIFT then GUIDE/
INPUT.
For EXIT, press and
release SETUP/SHIFT
then LAST/EXIT.
For MUTE, press and release
SETUP/SHIFT then OK.
NOTE: Remote will stay in shift mode until the SHIFT
button is pressed again, or until 10 seconds of
inactivity. The red indicator light will blink when the
remote is in shift mode.
10