Product Description - Chauvet DJ HURRICANE HAZE 1DX Guía De Referencia Rápida

Product Description

The Hurricane Haze 1DX is a compact and lightweight hazer that creates a thin and consistent atmosphere to enhance
any light show. The built-in volume knob and digital display offer easy control of stand-alone and DMX settings.
Product Overview
LED Display
Menu Buttons
Haze Volume
Knob
DMX In/Out
Power In
Fuse Holder
This product may NOT be tilted. This product should be level when on a surface.
While operating the Hurricane Haze 1DX, make sure there is adequate haze fluid in the machine to
prevent pump and heater damage. When the haze fluid level becomes low, simply add more haze
fluid to continue using the Hurricane Haze 1DX.
FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your Hurricane Haze
1DX. Make sure you use FCQ regularly, no longer than 90 days between cleanings, to increase the
life of your product.
AC Power
This product has a fixed voltage power supply and it can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC,
50 Hz, depending on the specific model.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Hurricane Haze 1DX QRG Rev. 1
QUICK REFERENCE GUIDE
Fan Fluid Level Indicator
Carry Handle
Fluid Tank
Rubber Feet for
Surface Mounting
(x4)
EN
Nozzle
2