Led Status; Getting Started; Connecting To Your Audio System; Analogue - Marmitek BOOMBOOM 93 Modo De Empleo

3.4 LED status

LED status
Blue LED flashing
Blue LED lit continuously
Green LED flashing
Green LED lit continuously
4

Getting started

Please take the following steps before using the product:
x
Connect the BoomBoom 93 to your audio system
x
Power the BoomBoom 93
x
Turn the BoomBoom 93 on
x
Pair the BoomBoom 93 with a Bluetooth-enabled
smartphone
x
Enjoy!
We will now explain this step by step.

4.1 Connecting to your audio system

You can connect the Marmitek BoomBoom 93 in two ways:
ANALOGUE or DIGITAL.

4.1.1 Analogue

x
Docking speaker/radio/cd player: Use the mini-jack cable (E)
to connect the BoomBoom 93 (audio output) to a docking
speaker or radio/cd player (audio input: AUX IN)
x
Audio system: Use the mini-jack adapter cable (D) to connect
the BoomBoom 93 (audio output) to your audio system (AUX
IN Cinch/RCA). Check the manual of your audio system how
to do this.
Then turn the switch between the optical connection and the
analogue connection to the analogue position.
8
Description
Pairing mode
Paired
aptX connection
aptX Low latency connection
© MARMITEK