Digital; Power Supply; Pairing - Marmitek BOOMBOOM 93 Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51

4.1.2 Digital

When you want to connect the BoomBoom 93 digitally, you'll need
to have a TOSLINK cable. This is not included.
x
Connect one side of the TOSLINK cable to the optical output
of the BoomBoom 93 and the other side to the digital audio
input (TOSLINK) of your audio system. Check the manual of
your audio system how to do this.
Then turn the switch between the optical connection and the
analogue connection to the optical position.

4.2 Power supply

Connect the Micro USB power cable (B) to the BoomBoom 93
(power connector) and to the USB power adapter (C). Plug the
USB power adapter into the wall outlet. The LED will flash slowly.
The BoomBoom 93 is now ready to be paired with your
smartphone.

4.3 Pairing

To pair the Marmitek BoomBoom 93, it is necessary that the
BoomBoom 93 is switched on, properly connected and powered.
The BoomBoom 93 can remember up to 8 paired smartphones.
Re-pairing with each subsequent connection is not required. If a
9th smartphone is paired with the BoomBoom 93, the first
smartphone that was paired with the BoomBoom 93 will be erased
from its memory.
BoomBoom 93
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Boomboom 93

Tabla de contenido