System Installation; System Structure - Televes 716701 Guia Rápido

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
HDMI TRANSMITTER & RECEIVER

3. System Installation

1.
Use HDMI cable to connect the HDMI IN of the
Transmitter to a Source device. If you want to watch the
source program on the same time, you can use another
HDMI cable connected the HDMI OUT to display (HDTV).
A/V Sources: Satellite receiver, CATV STB, BD player,
PS4, XBox...
2.
Use HDMI cable to connect the HDMI OUT of the
Receiver to a display device.
A/V Displays: HDTV, Projector.
3.
Connect the IR emitter to the Transmitter. And then
place the emitter probe in front of the source device's
IR receiver.
Connect the IR receiver to the Receiver. And then place
the receiver probe in front. (If you do not need the IR
extending function, please skip step 3).
4.
Connect a DC5V/1A power adaptor to the Power Jack
(Micro USB type) of the Transmitter.
5.
Connect another DC5V/1A power adaptor to the Power
Jack (Micro USB type) of the Receiver.
6.
Connection completed & ready to use.
If no video signal on your display, please pairing the TX and
RX fi rst. (Press the MODE key of RX box and then press the
MODE key of TX box).
4. Operations
TX & RX Pairing MODE
1.
First Press "MODE" key once on the Receiver BOX.
2.
You will see message "Connecting through Pairing..." on
screen.
3.
And then Press "MODE" key once on the Transmitter
BOX.
4.
Connection will be auto-established after successfully
paired.
LED Indication
There are LEDs and UI for indication of System operation,
for more detail please check the table bellowed.

5. System Structure

POWER
ADAPTOR
TV
HDMI OUT
HDMI IN
Condition
TX
Star up
LED solid
(Power On)
RED
Mode
RED LED
(Press Button)
fl ashing
No
Blue LED
Connection
fl ashing
Connection
LED solid
& Play
Blue
IR Extending Function
1.- Make sure the IR Emitter Probe has been installed
properly on the Transmitter.
2.- Make sure the IR Receiver Probe has been installed
properly on the Receiver.
3.- Use the remote controller of your source device to
control the source through the Receiver.
Specifi cations
HDMI
Resolution
Frequency Range
Channel Bandwidth
RF output power
Security
Distance
Latency
Antenna Type
Video
Gbps
Data Rate
Audio
Mbps
Supply Voltage
IR carrier
Dimension
POWER ADAPTOR
HDMI
OUT
RX
RX UI (TV Screen)
LED solid
Star up Image
RED
LED solid
Connection
Blue
through pairing
LED solid
Scanning
Blue
LED solid
Video
Blue
HDMI High Speed
HD 1080p/60Hz
WiFi 5GHz band
MHz
20 or 40
dBm
10 ±1
HDCP 2.0 based
encryption
Up to 100ft (30m)- -(line
m
of sight) / no walls
seg
< 0.5
Dual PCB antennas
≤3
≤18
V
5
A
1
KHz
30 ~ 60
mm
14x85x85
TV
6

Publicidad

Tabla de contenido
loading

Tabla de contenido