Teka HLF 840 Guía De Uso página 21

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

programming Cooking Time
1. Touch
or
until the
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time.The
bol will flash slowly.
3. Select a function and a cooking temperature
using the oven commands.
4. Once the cooking time is up, the oven will
turn off, an alarm will sound and the
symbol will flash quickly.
5. Touch any key to stop the alarm and turn
off the
symbol. The oven will switch on
again.
6. Set the controls to the
the oven.
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
NoTE
With the Cooking Time function, the remain-
ing time will show permanently on the dis-
play. You cannot see the current time on the
display when this function is set.
programming the Cooking stop Time
1. Touch
or
until the
display starts to flash and press
see the current time on the timer display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time. The
bol will flash slowly.
symbol on the
. The
or
. You
sym-
position to turn off
or
until the
to
symbol on the
. You will
or
. You
sym-
3. Select a cooking function and temperature.
4. When the cycle is finished, the oven will turn
itself off, a buzzer will sound and
will flash quickly.
5. Touch any sensor to stop the alarm and to
turn off the
, symbol. The oven will switch
on again.
6. Set the controls to the
the oven.
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
programming Cooking Time
and Cooking stop Time
1. Touch
or
until the
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the cooking time by touching
. Next, a double beep will sound, the re-
maining time will appear on the display and
the
symbol will flash slowly.
3. Touch
or
until the
display starts flashing, then press
will see the expected completion time on the
timer display.
4. Select the cooking end time by touching
or
. Next, a double beep will sound and
the current time will be displayed on the dis-
play.
5. Select a cooking function and temperature.
The oven will remain disconnected with the
and
symbols lit up. The oven is now
programmed.
6. When it is time to start cooking, the oven will
turn on and will operate for the programmed
cooking time.
7. While cooking, the cooking time remaining
will be displayed and the
flash slowly.
English
symbol
position to turn off
or
until the
to
symbol on the
. The
or
symbol on the
. You
symbol will
21
User's Guide

Publicidad

Tabla de contenido
loading

Tabla de contenido