General Safety Rules - HDX HDXFWS Manual Del Usuario

GENERAL SAFETY RULES

UNPACKING
FEATURES
OPERATION
ADJUSTING THE EXHAUST
LOADING FASTENERS
UNLOADING FASTENERS
CLEARING JAMS
NO-MARRING PAD
SETTING THE AIR PRESSURE
FIRING THE TOOL
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLE SHOOTING
WARRANTIES
WARNING:
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
SAVE THIS MANUAL
● Keep this manual for the safety warnings,
precautions, operations, inspections and
maintenance. Keep this manual and the
receipt in a safe and dry place for future
reference.
SYMBOLS
●
Some of the following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
' : To reduce the risk of injury, user must read and understand operator's manual
Read operator s manual
before using this product.
Risk to hearing : Always wear ear protection when using this tool. Failure to do so may result in hearing loss.
Eye protection :
Always wear safety goggles safety glasses with side shields or a full face shield when
.
operating this product
Risk of serious personal injury : Never place hands or any other body parts in the fastener discharge area
of the nailer. The tool might eject a fastener and could result in death or serious personal injury.
02
WARNING:
!
To avoid serious personal injury, do not
attempt to use this product until you read
the manual thoroughly and understand it
completely. Save this manual and review
frequently for continuing safe operation
and instructing others who may use this
tool.
, ,
WDH100401AV -S 10/10
SYMBOLS
P3
● In this manual, on the labels, packages and all other information provided with this tool. The following
P6
signal words and meanings are intended to explain the levels of risk associated with this tool.
P6
SYMBOLS
!
P7
P7
!
P7
P7
P8
P8
GENERAL SAFETY RULES
P8
INSTRUCTIONS PERTAINING TO A RISK OF
P9
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS
P9
P10
WARNING:
!
P11
When using tools, basic precautions
should always be followed, including the
following:
CALIFORNIA PROPOSITION 65
WARNING:
!
This product or its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
WORK AREA
● Keep the work area clean and well lighted.
Cluttered benches and dark areas increase the
risks of accidents.
●
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
creates a spark which may ignite flammable
liquids, gases or dust.
● Keep bystanders, children, and others away
while operating the tool.
result in improper use and cause injury.
Avoid unintentional misfires.
●
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
SIGNAL MEANING
Indicates a potentially hazardous situation, which, if not avoided,
WARNING:
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
CAUTION:
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
CAUTION:
property damage.
PERSONAL SAFETY
Do not nail on top of another nail.
able to cause the nail to be deflected and hit
someone, or cause the tool to react and result in
a risk of injury to persons.
Remove finger from the trigger when not
driving fasteners.
finger on trigger, the tool is able to fire a
fastener.
Always wear eye protection.
others in the work area should always wear
ANSI-approved safety goggles with side
shields. Eye protection is used to guard against
flying fasteners and debris, which may cause
severe eye injury. You can use the goggles
packed with the tool.
Always wear hearing protection when
using the tool.
intensity noise may cause hearing loss.
Use safety equipment.
safety shoes and a hard hat must be used for
the applicable conditions. Wear a full face shield
if you are producing metal filings or wood chips.
Dress properly. Do not wear loose clothing
or jewelry.
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
Stay alert, watch what you are doing and
use common sense when operating a
power tool.
The tool
the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
Avoid unintentional firing.
Distractions could
from trigger when not driving fasteners,
especially when connecting the tool to the air
Always use
supply.
Keep proper footing and balance at all times.
Proper footing and balance enables better
control of the tool in unexpected situations.
This is
Never carry the tool with
Operator and
Prolonged exposure to high
A dust mask, non-skid
Contain long hair. Keep your hair,
Do not use tool while tired or under
Keep fingers away
03