American-Lincoln 4366XP Instrucciones De Uso página 9

OPERATIONS OF CONTROLS AND GAUGES
FIGURE 7
ACCELERATOR & DIRECTIONAL CONTROL PEDAL (See Figure 7)
The accelerator and directional control pedal is located on the fl oor of the operator's area, to the right of the brake pedal. The accelerator and
directional control pedal controls the machine direction and travel speed.
1. Put foot pressure on the upper portion (A) of the pedal. The machine will move forward.
2. Increase the foot pressure on the upper portion (A) of the pedal to increase the forward speed.
3. Put foot pressure on the lower portion (B) of the pedal. The machine will move in reverse.
4. Increase the foot pressure on the lower portion (B) of the pedal to increase the reverse speed.
5. To stop the machine, put light foot pressure on the opposite end of the accelerator and directional control pedal. If the machine is moving
forward, put light foot pressure on the lower portion of the pedal. If the machine is moving in reverse, put light foot pressure on the upper
portion of the pedal.
BACK UP ALARM (OPTION) (See Figure 2)
The back up alarm (N) is operated by a switch that is located under the lower section of the Accelerator and directional control pedal. The alarm
makes a loud audible noise when the machine is being driven in
reverse.
SEAT ADJUSTMENT (See Figure 2)
This lever (O) is located on the right of the seat. This lever allows the seat to be adjusted forward or back when the lever is moved.
PARKING BRAKE (See Figure 8)
The parking brake lever (P) is located in the left side of the driver compartment fl oor. This lever when raised to the upright position will "lock" the
foot brake pedal in the down position.
ENGLISH / A-9
FIGURE 8
FORM NO. 56041727 - 4366XP - A-9