Detalled Machine Operattion - Urrea BAL24A Manual De Usuario Y Garantía

Note: Motorcycle tires automatic input para-
meters also need to install a dedicated exten-
sion rod.
E N G L I S H •
Press to choose parameter, and press
to modify parameter value. After in
putting the parameter press
enter next parameter input state. In the state
of D value input, press
inch.
CHOSE BALANCE MODES
The default mode of this equipment is standard
dynamic mode. Choose other mode by pres-
sing keys DYN/STA/ALU/MOT. OPT and Hidden
weight modes are two attached modes.
Opt mode can be operated by pressing the key
OPT/HID under dynamic and static modes.
Hidden weight mode can be operated by pres-
sing OPT/HID and exit by pressing STOP under
ALUS modes. Press STOP can stop measure-
ment during measurement.
U s er 's M an u al
to save and
C
to convert mm and
23