Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Lateral end of lead paste.
Pull the gauge and stick the counterweight on
the exact "0"distance position shown on the
inside display window.
Note: The automatic gauge can only locate the
12 o'clock position, it will return to the
measurement interface if at any other posi-
tion. So it is better to use the brake pedal to
locate it at 12 o'clock and do the following
operation.
Left and right were displayed inside and outsi-
de of the imbalance value ALU.
Rotate the wheel, when it comes to the insi-
de correction position, the outside display win-
dow twinkles to show the distance between
the correction position and the gauge tip.
Medial end of lead paste.
Pull the gauge and stick the counterweight on
the exact"0" distance position shown on the
outside display window.
27
Publicidad
Tabla de contenido
