Technical Data; General Specifications - Festo 152962 Manual De Instrucciones


Limit system pressure to 6 MPa (60 bar).

Risk of injury when switching on the hydraulic unit!
Cylinders may advance and retract automatically.

Connecting the hoses
– Never connect or disconnect the hoses when the hydraulic unit is running, or while under pressure!
Couplings must be connected when unpressurized.
– Place the coupling socket vertically onto the coupling nipple.
The coupling socket and the coupling nipple must not be fitted askew.
– After each disconnection, make sure that the couplings have closed themselves!

Before commissioning, make sure that all tank lines have been connected and that all couplings have
been fitted securely.
6

Technical data

6.1

General specifications

Parameter
Dimensions
Weight
Operating temperature
Subject to change
© Festo Didactic 369805
Value
580 x 300 x 180 mm
Empty approx. 19 kg
Filled with oil approx. 24 kg
5 ... 40° C
Hydraulic power packs with 5 l tank
25