Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW OFTEN

• Allows you to set the program to repeat every 6 hours,
12 hours, or from 1 to 7 days
• Rotate the dial to HoW oFTEN
• Press the + or - button to set the frequency
RUN
• Rotate the dial to RUN
• Timer waters according to programmed time, duration,
and frequency.
• The start times and cycle duration are maintained during
oFF or RUN mode.
• The dial must remain in RUN position for the cycle to run.
If the dial is turned to any other position, watering will stop.
• Rain drops will be shown when the watering is on, on the
corresponding valve.
SET RAIN DELAY (WATERING DELAY):
• With the dial in the RUN position, pressing (+) will cause
a 24 hour delay to the program.
• Same delay will occur on both Left and Right valves.
• Delays of 0, 24, 48 hours, and 72 hours are possible. Delay
time can be changed by pushing + or - at any time.
• Display will flash between clock and hours remaining
before programmed cycle resumes.
• To remove Watering delay, turn dial to oFF and then back
4

Publicidad

Tabla de contenido
loading

Tabla de contenido