HP DeskJet 3700 Serie Manual De Instrucciones

HP DeskJet
Need help?
www.hp.com/support/dj3700
Control panel display: Indicates number of copies, wireless status
1
Wi-Fi Direct status
Information
2
and its current status.
Resume : If the light is blinking, it indicates a warning or error state. Press the button to resume
3
printing after the error is cleared (for example, after clearing a paper jam).
4
Cancel : Stops the current operation.
Wireless
5
wireless capability is on, but the printer is not yet connected to a wireless network. If the blue light
stays on, the printer is connected to a wireless network.
Color Copy
6, 8
the number of color copies, continue to press the button quickly.
7
Copy light: A blinking light indicates the printer is ready to scan.
9
Ink Alert light: Indicates low ink or cartridge problems.
Web Services
10
the light is blinking, there is a problem with Web Services, so press to print a page that will help you
solve the problem. When the light stays on steady, Web Services are ready for use.
Wi-Fi Direct
11
device is trying to connect to the printer. Press the button to allow the connection.
To print a Wi-Fi Direct guide, press the Wi-Fi Direct and Information buttons at the same time.
*J9V86-90077*
*J9V86-90077*
J9V86-90077
3700 All-in-One series
, paper-related warnings
: Press to print an information page that provides a summary of the printer information
: Press to turn the printer wireless capabilities on or off. If the light is blinking, the
and Black Copy : Press to start a color or black-and-white copy job. To increase
: If the light is off, press to print a page that will help you set up Web Services. If
: Press to turn Wi-Fi Direct on or off. If the light is blinking, a Wi-Fi Direct capable
EN
NO
or other errors, and estimated ink levels
DE FR IT ES PT NL
DA FI ET LV LT
© Copyright 2017 HP Development Company, L.P.
The information contained herein is subject to change without notice.
and signal strength
Printed in [English]
SV
,
.