1.3 Technical Characteristcs
CHARACTERISTICS
Average Production
(*) Voltage and frequency are only one , the one the motor is designed for
2. Instalation and Pre-Operation
2.1 Installation
2.1.1 Placing
The equipment must be placed on to a levelled stable surface approximately 850 mm high.
2.1.2 Electrical Installation.
The equipment has been designed to operate 110 or 220 Volts. When you receive the
equipment check the voltage indicated on the cord label
The power plug has 3 (three) pins flattened the one this is the ground. All the 3 (three) pins
must be properly connected.
6
Voltage
Frequency
Power Rating
Consumption
Height
Width
Depth
Net Weight
Shipping Weight
TABLE 01
UNIT
Oranges /min.
V
Hz
W
kW/h
mm
mm
mm
kg
kg
EX SUPER
15
110 or 220 (*)
50 - 60 (*)
370
0,37
460
290
250
10,3
12
850 mm