Product Description And Specifications; Intended Use; Product Features; Technical Data - BTI A-FC 12V Instrucciones De Servicio Originales

The battery can be damaged by pointed ob-
u
jects such as nails or screwdrivers or by
force applied externally. An internal short cir-
cuit may occur, causing the battery to burn,
smoke, explode or overheat.
Only use the battery with products from the
u
manufacturer. This is the only way in which
you can protect the battery against dangerous
overload.
Protect the battery against heat, e.g.
against continuous intense sunlight,
fire, dirt, water and moisture. There is
a risk of explosion and short-circuiting.
Product Description and
Specifications
English
Read all the safety and general in-
structions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or ser-
ious injury.
Please observe the illustrations at the beginning
of this operating manual.

Intended use

English
The power tool is intended for driving and loosen-
ing screws and for drilling in wood, metal and
plastic.

Technical data

English
Cordless drill/driver
Article number
Rated voltage
No-load speed
– First gear
– Second gear
Maximum torque, soft
screwdriving application
according to ISO 5393
Maximum torque, hard
screwdriving application
according to ISO 5393
Max. drilling diameter (first/second gear)
– Wood
– Steel
Max. screw diameter
Tool holder
32 | English
The power tool can be used with an angle screw
adapter, an off-set angle adapter, a bit holder ad-
apter or a drill chuck adapter.

Product features

The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Tool holder
(2) Torque presetting ring
(3) Gear selector switch
(4) Battery release button (2x)
(5) Battery
(6) Rotational direction switch
(7) On/off switch
(8) Battery charge indicator
(9) Worklight
(10) Bit holder adapter
(11) Drill chuck adapter
(12) Off-set angle adapter
(13) Angle screw adapter
(14) Locking ring
(15) Handle (insulated gripping surface)
(16) Universal bit holder
A) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.
A-FC 12V Bit holder
adapter
9090292 9090582
V= 12
-1
min 0 – 400
min -1 0 – 1300
A)
Nm 15
Nm 30 A)
mm 19
mm 10
mm 7
6.35 (¼") 6.35 (¼")
English
A)
A)
A)
A)
A)
Drill chuck Off-set
adapter angle
adapter
9090583 9090584
– – –
– – –
– – –
– – –
– – –
– – –
– – –
– – –
1 – 10 6.35 (¼")
1 609 92A 50M • 21.2.19
Angle
screw
adapter
9090581
–
–
–
–
–
–
–
–
6.35 (¼")