Noise/Vibration Information - BTI A-FC 12V Instrucciones De Servicio Originales

Cordless drill/driver
Weight according to
EPTA-Procedure
01:2014
Permitted ambient temperature
– during charging
B)
– during operation and
during storage
Recommended batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C

Noise/vibration information

Noise emission values determined according to EN 60745-2-1 for the drill chuck adapter.
Noise emission values determined according to EN 62841-2-2 for the rest of the adapters listed here.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protec-
tion
Total vibration values a (triax vector sum) and uncertainty K determined according to EN 60745-2-1 for
h
the drill chuck adapter.
Total vibration values a (triax vector sum) and uncertainty K determined according to EN 62841-2-2 for
h
the rest of the adapters listed here.
Drilling in metal:
a
h
K
Screwdriving:
a
h
K
The vibration level and noise emission value given
in these instructions have been measured in ac-
cordance with a standardised measuring proced-
ure and may be used to compare power tools.
They may also be used for a preliminary estima-
tion of vibration and noise emissions.
The stated vibration level and noise emission
value represent the main applications of the
power tool. However, if the power tool is used for
other applications, with different application tools
or is poorly maintained, the vibration level and
noise emission value may differ. This may signific-
1 609 92A 50M • 21.2.19
A-FC 12V Bit holder
kg 0.8 – 1.1 A)
°C 0 to +45
°C -20 to +50
12V x.x Ah L-x
10.8V x.x Ah L-x
LG 12V L-x
LG 10.8V L-x
English
A-FC 12V Bit holder
dB(A) 79
dB(A) 80
dB 3
2
m/s < 2,5
2
m/s 1,5
m/s 2 < 2,5
2
m/s 1,5
antly increase the vibration and noise emissions
over the total working period.
To estimate vibration and noise emissions accur-
ately, the times when the tool is switched off or
when it is running but not actually being used
should also be taken into account. This may signi-
ficantly reduce vibration and noise emissions over
the total working period.
Implement additional safety measures to protect
the operator from the effects of vibration, such as
servicing the power tool and application tools,
Drill chuck
adapter adapter
0.1 0.2
– –
– –
– –
– –
Drill chuck
adapter adapter
adapter
– –
– –
– –
– –
Off-set Angle
angle screw
adapter adapter
0.3 0.3
– –
– –
– –
– –
Off-set Angle
angle screw
adapter
– –
– –
– –
– –
English | 33