GB
LED Wall Floodlight 60 W SH-5.710
Article no. 557220
Intended use
The LED Wall Floodlight 60 W SH-5.710 by Staudte Hirsch is a stationary lighting so-
lution for indoor and outdoor applications. It was designed for extreme operational
conditions and is suitable, for example, for use as wall floodlight.
Scope of delivery
LED Wall Floodlight 60 W SH-5.710
Instruction Manual
Safety and warning instructions
The following safety notes and hazard warnings serve for the protection of both the
device and your health. So please read the following points thoroughly.
For safety and technical approval reasons (CE), any unauthorized conversion and/
or modification of the product is not permitted.
The SH-5.710 fulfils the requirements of the protection type IP 65 (complete
protection against contact, dust depositing on the internal surfaces and splashing
water from any directions). This is why you should never open the housing, as
this protection may no longer be guaranteed.
To avoid eye injury, never look into the light source or do not point the light
beam in the direction of persons or animals.
The use of the product under unfavorable environmental conditions must be
avoided. Unfavorable environmental conditions include: ambient temperatures
above 50 °C, flammable gases, solvents, vapors, dust, relative humidity in excess
of 80 %, and moisture.
If there is reason to believe that safe operation is no longer possible, the device
must be switched off immediately and secured against unintentional operation.
Service and repairs may only be carried out by authorized and qualified
personnel.
/ 08
Designed in Germany. Powered by IVT.
In case of improper handling or non-observance of these operating ins-
tructions or the safety notes stated herein, the warrant/guarantee shall
lapse. We do not assume liability for any personal injury, damage to pro-
perty or subsequent damage that can be attributed to this.