Wall Mounting; Mast Mounting - Kathrein BZD 40 Manual Del Usuario

Safety Instructions and general Notes
DANGER
Danger to life from electric shock when touching electrical installations!
► Before drilling holes, make sure that there is no electrical wiring in the wall.
For wall, mast and balcony mounting:
Make sure that the antenna is mounted such that the cap and the cable face downwards. This prevents rain from drip-
ping inside the antenna through the cap.
Exception:
Only if the antenna is protected from the rain, the horizontal mounting is permitted.

Wall Mounting

The necessary mounting material for mounting the antenna on a wall is included in the
scope of delivery.
1. Find the optimum reception position for the antenna.
2. Drill the holes for the wall bracket.
3. Mount the antenna on the wall.

Mast Mounting

The necessary mounting material for mounting the antenna on a mast is included in the
scope of delivery.
1. Attach the two supplied worm drive hose clips to the mast. Make sure not to tighten the
bolts fully.
2. The mounting bracket of the BZD 40 has lugs at the top and at the bottom. Engage
them in the two hose clips.
3. Rotate the antenna to obtain the optimum reception.
4. Tighten the worm drive hose clips and the clamp screw.
4 / 6