The Fountainhead Group 190197 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
Assemble Hose To Tank:
IMPORTANT: Do not attempt to heat, or
alter hose, hose nut, or barb prior to
assembly.
1. Push the hose barb completely into the
tank. See Figure 1.
2. Slide hose nut along hose and over the
threads on the tank. Turn hose nut
clockwise and tighten securely. See Figure
2.
NOTE: Do not use tools to tighten hose nut.
Assemble Extension to Shut-off:
1. Install the filter (B) into the handle (A). See
Figure 3.
2. Assembly the shut-off assembly (C) to the
handle (A) and tighten securely.
3. Make sure the valve seat (D) is present in
the end of the shut-off assembly (C).
4. Install the extension (E) onto the end of the
shut-off assembly (C). Tighten the nut
securely.
Install the Nozzle:
1. Install the adjustable nozzle onto the end of
the extension and tighten securely. See
Figure 4.
NOTE: Make sure the o-ring (#171089V) is
present on the inside of the nozzle before
installing onto the extension.
Figure 1. Install Hose
Figure 2. Tighten Hose Nut
A
C
Figure 3. Assemble Shut-off & Extension
A. Handle
B. Filter
C. Shut-off Assembly
D. Valve Seat
E. Extension
A
B
C
Figure 4. Install the Nozzle
A. Adjustable Nozzle
B. O-Ring (#171089V)
C. Extension
2
B
D
E