Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
1.
Device will not charge.
Verify:
•
The SL15 is powered on.
•
Your wall outlet is supplying power.
•
The device to be charged requires 5V.
•
Devices to be simultaneously charged do not total more
than 12.5 Amps.
•
Any devices plugged into the 2.4 Amp ports do not draw
more than 2.5 Amps.
•
The USB charge cable is correctly inserted into the SL15
and device and is free from dirt and debris.
2.
The SL15 will not turn on.
Verify:
•
Proper connection between AC adapter and the SL15.
•
Proper connection between AC adapter and wall socket.
•
The wall socket has power.
FCC warnings
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum 20cm between the radiator and your body.
This transmitter must not be collocated or operating in conjunction with
any other antenna or transmitter unless authorized to do so by the FCC.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
6
Publicidad
Tabla de contenido
