Installation In Horizontal Sliding Windows - Hunter HPAC-08C150 Instrucciones De Uso E Instalación

NOTE:The window installation kit can be used with vertical sliding windows between 18" and 50" wide.
Foal sealN
(Adhesive
type-shorter)
Cut the foam seal M(adhesive type) &
N (adhesive type-shorter)to the proper
length,and attach it to the window sash
and frame.
Insert the vent panel assembly,including
extension panels,if needed, into the window
opening.Extend the extension panels.if used.

Installation In Horizontal Sliding Windows

Extension panel
(if required)
Vent
Panel
Cut the foam seal A(Non-adhesive type)
to the window width.Stuff the foam seal
A between the glass and the window to
prevent air and insects from getting into
the room.
Install the Window-lock bracket with a E or F screw as
shown if you need. E screw is suitable for wood window,
F screw is suitable for metal window.
9
A
(Non-adhesive type)